HP 3380 HP LaserJet 3380 All-in-One - User Guide - Page 107

Removing and replacing the device control panel cover, with the inside of the device.

Page 107 highlights

Removing and replacing the device control panel cover 1. Turn off the device and unplug the power cord. 2. Remove the existing device control panel cover by lifting up on both sides of the cover edges until all of the snaps are disengaged. Set the old cover aside. CAUTION Be careful not to touch any components or buttons inside the exposed device control panel area. 3. Align the new device control panel cover at the lower notch. The cover notch should align with the inside of the device. 4. Press down until all the snaps are engaged, and then press outward until the device control panel cover is secured. 5. Plug the device in, and turn on the power switch. ENWW Removing and replacing the device control panel cover 95

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196

Removing and replacing the device control panel cover
1.
Turn off the device and unplug the power cord.
2.
Remove the existing device control panel cover by lifting up on both sides of the cover
edges until all of the snaps are disengaged. Set the old cover aside.
CAUTION
Be careful not to touch any components or buttons inside the exposed device control panel
area.
3.
Align the new device control panel cover at the lower notch. The cover notch should align
with the inside of the device.
4.
Press down until all the snaps are engaged, and then press outward until the device
control panel cover is secured.
5.
Plug the device in, and turn on the power switch.
ENWW
Removing and replacing the device control panel cover
95