HP 3380 HP LaserJet 3380 All-in-One - User Guide - Page 99

Reinstall the print cartridge, and close the print-cartridge door., Plug the device

Page 99 highlights

5. Gently pull the pickup roller up and out. 6. Position the new or cleaned part in the slot that held the pickup roller previously. See Cleaning the pickup roller for instructions. Note Circular and rectangular pegs on each side prevent you from incorrectly positioning the pickup roller. 7. Rotate the top of the new pickup roller away from you until both sides snap into place. Note Touching the black sponge roller can damage the device. 8. Reinstall the print cartridge, and close the print-cartridge door. 9. Plug the device in, and then turn on the power switch. ENWW Replacing the pickup roller 87

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196

5.
Gently pull the pickup roller up and out.
6.
Position the new or cleaned part in the slot that held the pickup roller previously. See
Cleaning
the
pickup
roller
for instructions.
Note
Circular and rectangular pegs on each side prevent you from incorrectly positioning the pickup
roller.
7.
Rotate the top of the new pickup roller away from you until both sides snap into place.
Note
Touching the black sponge roller can damage the device.
8.
Reinstall the print cartridge, and close the print-cartridge door.
9.
Plug the device in, and then turn on the power switch.
ENWW
Replacing the pickup roller
87