HP 3380 HP LaserJet 3380 All-in-One - User Guide - Page 119
To clear other media jams, after adding the new media, and then place the stack in the tray.
View all HP 3380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
3. Grasp the handle on the print cartridge, remove the print cartridge, and set it aside. CAUTION To prevent damage to the print cartridge, do not expose it to light any longer than necessary. Place the print cartridge in a paper bag or other opaque container until you can place it back in the device. 4. With both hands, grasp the side of the media that is most visible (this includes the middle), and carefully pull it free from the device. Note Note CAUTION 5. When you have removed the jammed media, replace the print cartridge, and close the print cartridge door and the straight-through output door. The pressure release levers automatically close when you close the straight-through output door. 6. After clearing a media jam, you might need to turn the device off, and then turn it on again. When you add new media, remove all of the media from the input tray, straighten the stack after adding the new media, and then place the stack in the tray. To clear other media jams Do not use a sharp object, such as a pencil or scissors, to remove jammed media. If the media has crumpled and jammed in the back of the device, open the straight-through output door. Gently pull the media out of the rollers. Close the straight-through output door. ENWW Media jams occur in the printer 107