HP 381513-B21 HP Smart Array P800 Controller for Integrity Servers Installatio - Page 15
Downloading the Enclosure Firmware, Cross operating system BIOS, Firmware, Diagnostics, etc., Download
UPC - 882780622029
View all HP 381513-B21 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
1. Prepare to run saupdate from the Offline Diagnostics CD or the EFI partition: • To run saupdate from the Offline Diagnostic CD: a. Place the Offline Diagnostic CD containing saupdate.efi in the CD drive before booting the system. b. Boot the system to the EFI Shell prompt. c. Locate the cdrom entry in the list of mapped devices, and change to the device by entering its associated fs number (for example, fs0) under EFI Shell prompt. d. If the EFI utility is not located in the root directory, move to the directory where the file is located, for example: fs0:\> cd \EFI\HP\TOOLS\IO_CARDS\SmartArray • To run saupdate from the EFI partition: a. Download the SA EFI update utility saupdate.efi and copy it to the EFI partition. b. Boot the system to the EFI Shell and change directories to the EFI partition. c. If the EFI utility is not located in the root directory, move to the directory where the file is located, for example: fs0:\> cd \EFI\HP\TOOLS\IO_CARDS\SmartArray 2. • Use saupdate LIST to display all detected Smart Array controllers along with the active firmware versions. For example: fs0:\EFI\TOOLS> saupdate list Smart Array Offline Firmware Update Utility Version 2.07.09.02 (C) Copyright 2006 Hewlett-Packard Development Company, L.P. Seg Bus Dev Func 0 8 0 0 Description HP Smart Array P800 Version 4.10 External Enclosures Connected : Index Description 2 MSA70 Version 2.04 In this example, the system contains one MSA70 enclosure at segment 0, bus 8, device 0, function 0, index 2; enclosure firmware 2.04 is installed. Downloading the Enclosure Firmware To locate and download firmware for HP StorageWorks enclosures, follow these steps: 1. Go to the HP Software & Driver Downloads website, at: http://welcome.hp.com/country/us/en/support.html?pageDisplay=drivers 2. Search for the name of your enclosure; for example, "MSA60" or "MSA70". 3. In the search results, click Cross operating system (BIOS, Firmware, Diagnostics, etc.). 4. Click Download to download the firmware package. Updating the Enclosure Firmware NOTE: The following is a generic procedure to update firmware from the EFI shell. HP recommends that you follow the procedures supplied with the update package to install the firmware update. Use saupdate from the EFI Shell to update the firmware image on the enclosure. To update the enclosure firmware with saupdate, follow these steps: Verifying and Updating Enclosure Firmware Offline 15