HP 381513-B21 HP Smart Array P800 Controller for Integrity Servers Installatio - Page 23

Create Logical Drive, Enter

Get HP 381513-B21 - Smart Array P800 Controller RAID PDF manuals and user guides
UPC - 882780622029
View all HP 381513-B21 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

To create a logical drive using ORCA, follow these steps: 1. Select Create Logical Drive. The screen displays a list of available (unconfigured) physical drives and the valid RAID options for the system. 2. Use the arrow keys, space bar, and Tab key to navigate around the screen and set up the logical drive, including an online spare drive if one is required. NOTE: You cannot use ORCA to configure a single spare drive to be shared among several arrays. To configure shared spare drives, you must use the saconfig command on the CLI. 3. Press Enter to accept the settings. 4. Press F8 to confirm the settings and save the configuration. After several seconds, the Configuration Saved screen appears. 5. Press Enter to continue. 6. Create another logical drive by repeating steps 1-5 if necessary. For more information on using ORCA, see the HP Smart Array P400 and P800 Controller for Integrity Servers Support Guide at: http://docs.hp.com/en/netcom.html Configuring a Smart Array Series Controller as a Boot Device 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
To create a logical drive using ORCA, follow these steps:
1.
Select
Create Logical Drive
.
The screen displays a list of available (unconfigured) physical drives and the valid RAID
options for the system.
2.
Use the arrow keys, space bar, and
Tab
key to navigate around the screen and set up the
logical drive, including an online spare drive if one is required.
NOTE:
You cannot use ORCA to configure a single spare drive to be shared among several
arrays. To configure shared spare drives, you must use the
saconfig
command on the CLI.
3.
Press
Enter
to accept the settings.
4.
Press
F8
to confirm the settings and save the configuration.
After several seconds, the Configuration Saved screen appears.
5.
Press
Enter
to continue.
6.
Create another logical drive by repeating steps 1-5 if necessary.
For more information on using ORCA, see the
HP Smart Array P400 and P800 Controller for Integrity
Servers Support Guide
at:
Configuring a Smart Array Series Controller as a Boot Device
23