HP 381513-B21 HP Smart Array P800 Controller for Integrity Servers Installatio - Page 34

ESC 8, Enter, ORCA Main Menu Screen

Get HP 381513-B21 - Smart Array P800 Controller RAID PDF manuals and user guides
UPC - 882780622029
View all HP 381513-B21 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

NOTE: Pressing the F8 key at the ORCA prompt may not start ORCA on all terminals. If ORCA does not start when you press the F8 key, reboot the system and use ESC 8 at the ORCA prompt to start ORCA. Figure 2-1 ORCA Main Menu Screen To create a logical drive using ORCA, follow these steps: 1. Select Create Logical Drive. The screen displays a list of all available (unconfigured) physical drives and the valid RAID options for the system. 2. Use the arrow keys, space bar, and Tab key to navigate around the screen and set up the logical drive, including an online spare drive if one is required. NOTE: You cannot configure a single spare drive to be shared among more than one array. Each array must have its own spares. 3. Press Enter to accept the settings. 4. Press F8 to confirm the settings and save the new configuration. After several seconds, the Configuration Saved screen is displayed. 5. Press Enter to continue. 6. Create another logical drive by repeating steps 1-5 if necessary. 34 OpenVMS Installation

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
NOTE:
Pressing the
F8
key at the ORCA prompt may not start ORCA on all terminals. If ORCA
does not start when you press the
F8
key, reboot the system and use
ESC 8
at the ORCA prompt
to start ORCA.
Figure 2-1 ORCA Main Menu Screen
To create a logical drive using ORCA, follow these steps:
1.
Select
Create Logical Drive
. The screen displays a list of all available (unconfigured) physical
drives and the valid RAID options for the system.
2.
Use the arrow keys, space bar, and
Tab
key to navigate around the screen and set up the
logical drive, including an online spare drive if one is required.
NOTE:
You cannot configure a single spare drive to be shared among more than one array.
Each array must have its own spares.
3.
Press
Enter
to accept the settings.
4.
Press
F8
to confirm the settings and save the new configuration. After several seconds, the
Configuration Saved screen is displayed.
5.
Press
Enter
to continue.
6.
Create another logical drive by repeating steps 1-5 if necessary.
34
OpenVMS Installation