HP 381513-B21 HP Smart Array P800 Controller for Integrity Servers Installatio - Page 31
Downloading the Firmware Update, If Needed, Updating the Enclosure Firmware
UPC - 882780622029
View all HP 381513-B21 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
fs0:\EFI\TOOLS> saupdate list Smart Array Offline Firmware Update Utility Version 2.07.09.02 (C) Copyright 2006 Hewlett-Packard Development Company, L.P. Seg Bus Dev Func 0 8 0 0 Description HP Smart Array P800 Version 4.10 External Enclosures Connected : Index Description 2 MSA70 Version 2.04 In this example, the system contains one MSA70 enclosure at segment 0, bus 8, device 0, function 0, index 2; enclosure firmware 2.04 is installed. Downloading the Firmware Update, If Needed To locate and download firmware for HP StorageWorks enclosures, follow these steps: 1. Go to the HP Software & Driver Downloads website, at: http://welcome.hp.com/country/us/en/support.html?pageDisplay=drivers 2. Search for the name of your enclosure; for example, "MSA60" or "MSA70". 3. In the search results, click Cross operating system (BIOS, Firmware, Diagnostics, etc.). 4. Click the Download button to download the firmware package. Updating the Enclosure Firmware NOTE: This section provides a generic procedure to update firmware from the EFI shell. HP recommends that you follow the procedures supplied with the update package to install the firmware update. Use saupdate from the EFI Shell to update the firmware image on the HP Smart Array controller. Follow one of these two procedures to run saupdate: • If you are using saupdate from the Offline Diagnostic CD: 1. Download the firmware and copy it to the EFI partition. 2. Place the Offline Diagnostic CD containing saupdate.efi in the CD drive before booting the system. 3. Boot the system to the EFI Shell prompt. 4. Locate the cdrom entry in the list of mapped devices, and change to the device by typing its associated fs number (for example, fs0) under EFI Shell prompt. 5. If the EFI utility and firmware image files are not located in the root directory, move to the directory in which these files are located, for example: fs0:\>cd \EFI\HP\TOOLS\IO_CARDS\SmartArray IMPORTANT: Both saupdate.efi and the firmware image file must be located in the same directory. If they are not, copy them both to the EFI partition. Run the saupdate.efi using the fs0:\> saupdate command. • If you are not using the Offline Diagnostic CD: 1. Download the SA EFI update utility saupdate.efi and copy it to the EFI partition. 2. Download the firmware and copy it to the EFI partition. Verifying and Updating Enclosure Firmware Offline 31