HP 3PAR StoreServ 7400 2-node HP 3PAR Management Console 4.3.0 Software User&a - Page 108
Disk Filter, Summary, Editing a Common Provisioning Group, General
View all HP 3PAR StoreServ 7400 2-node manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
12. Growth Increment* - Click the Enabled checkbox, enter the appropriate value, and click the unit list (MiB, GiB, TiB) 13. Growth Limit* - Click the Enabled checkbox, enter the appropriate value, and click the unit list (MiB, GiB, TiB). 14. Growth Warning* - Click the Enabled checkbox, enter the appropriate value, and click the unit list (MiB, GiB, TiB). 15. Click Next to use the Disk Filter (if Show advanced options is enabled), or click Finish. *Appears only if Show advanced options is selected. Disk Filter The Disk Filter displays the physical disks used. Pattern displays the parameters of the disks used. To modify the list of disks used: 1. Click the Filter icon. 2. See "Filtering" (page 410) for details. 3. Click Next to view summary information, or click Finish. Summary Review the summary information, then click Finish. Editing a Common Provisioning Group To edit a Common Provisioning Group (CPG): 1. Access the CPGs tab. 2. Right-click the CPG you wish to edit. 3. In the menu that appears, click Edit. The Edit CPG wizard appears. General 1. 2. 3. Name - Enter a new name for the CPG (31 character maximum). Device Type - Select FC for Fast Class drives, NL for Nearline drives, or SSD for Solid State drives. Device RPM - Select the appropriate speed or . NOTE: The Device RPM number does not represent a rotational speed for the drives without spinning media (SSD). It is meant as a rough estimation of the performance difference between the drive and the other drives in the system. For FC and NL drives, the number corresponds to both a performance measure and actual rotational speed. For an SSD drive, the number is to be treated as relative performance benchmark that takes into account in I/O per second, bandwidth, and the access time. 4. From the Availability* list, select Cage (default), Port, or Magazine. 5. From the Preferred Chunklets* list, select Fast (default) or Slow. 6. RAID Type - Select the RAID type for the volume. NOTE: HP strongly recommends RAID 6 for high capacity Nearline drives. 7. Set Size - Select the set size. 8. From the Step Size* list, select default, 32, 64, 128, 256, or 512 KiB. The default and available values depend on raid type and device type used. If FC or NL drives are used, the step size defaults to 256 KiB for RAID 0 and RAID 1, and 128 KiB for RAID 5. If SSD drives are used, 108 Managing Common Provisioning Groups