HP 3PAR StoreServ 7400 2-node HP 3PAR Management Console 4.3.0 Software User&a - Page 215
Inventory Tab
View all HP 3PAR StoreServ 7400 2-node manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 215 highlights
Group Field Description Connected Device Type Type of device that the port is connected to. Free, Disk, Host, Peer, or InServ. Connected Device Name of device that the port is connected to, e.g. host1, cage0. Mode Port firmware mode setting. Ports in Initiator mode are connected to drive cages and ports in Target mode export to hosts. Suspended mode is for target ports that have not yet been initialized by the system (rare). Peer mode is for Ethernet ports. State Current state of the port. Resources Total Data Throughput The throughput in KB/sec. Settings Connection Mode The type of port connection. Connection Type Connection type or port connection setting (Loop, Point, or Loop-point). When the port is set to Loop-point, both loop and point-to-point connections are enabled. Configured Rate Data transfer rate setting (for example, 1 Gbps). Auto indicates that the system automatically selects the rate. Max Rate Maximum rate of connection from the port. Class 2 Indicates whether Fibre Channel service Class 2 is Disabled, Ack 1 or Ack 0. VCN For fabric attached ports, indicates the VLUN change notification setting. When set to Enabled, notices are generated and sent to the fabric controller. When set to Disabled, no notification is sent. Unique Node WWN Indicates whether the node's WWN is Enabled or Disabled. Interrupt Coalesce If Disabled, each I/O generates a separate interrupt to the HBA port driver rather than generating one interrupt for multiple I/O completion. Fibre Channel Settings Topology Type of connection (Private Loop, Public Loop, or Point-Point). Class Identifies which Fibre Channel classes of service are enabled (2, 3, or 2/3). 2/3 indicates that both Class 2 and Class 3 are enabled. Adaptor Type Model of the Fibre Channel adapter that contains the port (for example, QLOGIC 2302). Remote Port WWN World Wide Name of the remote port. Remote Node WWN World Wide Name of the remote node. Mode Change Indicates whether port mode change from initiator to target or vice versa is Allowed or Prohibited. This setting is configured using the InForm CLI command controlport. Link State The state of the link. Inventory Tab The Inventory tab displays information about the Remote Copy ports on a system such as the ports' manufacturer and firmware version. The list pane of the Inventory tab displays summary information about the system's RCFC and RCIP ports. The detail pane displays details about a selected RCFC or RCIP port from the list pane. For information about the detail pane, see "RCIP Tab" (page 212) and "RCFC Tab" (page 213). Viewing Remote Copy Information 215