HP 3PAR StoreServ 7400 2-node HP 3PAR Management Console 4.3.0 Software User&a - Page 282

The Settings tab displays the following information: Group System Parameter Descriptors Network Configuration Field FC Raw Space Alert NL Raw Space Alert SSD Raw Space Alert Description The raw space alert threshold (in GiB) for Fast Class devices. The raw space alert threshold (in GiB) for Near Line devices. The raw space alert threshold (in GiB) for SSD devices. NOTE: The HP 3PAR Management Console displays the devices currently installed in your system. For example, if you do not have Fast Class drives installed, the FCRaw Space Alert field will not appear on the Settings tab. Copy Space Reclaim Maximum Volume Retention Time Chunklet Size Location Owner Contact Comments IPv4/IPv6 IP Address Subnet Mask Prefix Active Node Indicates if the copy space reclaim feature is Enabled or Disabled. The set maximum volume retention time. The set size of the chunklet (in GiB) of the physical disk. Location of the system (if entered). The owner of the system (if entered). Contact information (if entered). Any notes about the system (if entered). Radio buttons indicating if you wish to view either IPv4 or IPv6 network configuration information. If your system is not configured for IPv6, the IPv6 button is disabled. The system's IP address. (If IPv4 was selected) The subnet mask. (If IPv6 was selected) The decimal value indicating the number of contiguous, higher-order bits of the address that make up the network portion of the address. The active system node. 282 Viewing System Information