HP 3PAR StoreServ 7400 2-node HP 3PAR Management Console 4.3.0 Software User&a - Page 25

Initializing a Port NOTE: This operation can only be performed on Fibre Channel (FC) and Remote Copy over Fibre Channel (RCFC) ports. To initialize a port: 1. Access the ports Summary tab. 2. Right-click the port you wish to initialize then click Initialize in the menu that appears. The Initialize Port dialog box appears. 3. Click Yes. Synchronizing a Port with the Name Server NOTE: This operation can only be performed on Fibre Channel (FC) and Remote Copy over Fibre Channel (RCFC) ports. To synchronize a port with the name server: 1. Access the ports Summary tab. 2. Right-click the port you wish to sync then click Name Server Sync in the menu that appears. The Name Server Sync dialog box appears. 3. Click Yes. Issuing an LIP Command NOTE: This operation can only be performed on Fibre Channel (FC) and Remote Copy over Fibre Channel (RCFC) ports. To issue an LIP command: 1. Access the ports Summary tab. 2. Right-click the port on which you wish to issue the LIP command then click Issue LIP in the menu that appears. The Issue LIP dialog box appears. 3. Click Yes. Enabling a Remote Copy Interface NOTE: This operation can only be performed on Remote Copy over IP (RCIP) ports. To enable a Remote Copy interface: 1. Access the ports Summary tab. 2. Right-click the disabled Remote Copy port you wish to enable then click Enable Interface in the menu that appears. The Enable Interface dialog box appears. 3. Click Yes. Disabling a Remote Copy Interface NOTE: This operation can only be performed on Remote Copy over IP (RCIP) ports. To disable a Remote Copy interface: 1. Access the ports Summary tab. Initializing a Port 25