HP 3PAR StoreServ 7400 4-node HP 3PAR Command Line Interface Reference (OS 3.1 - Page 444
Partner, FailoverState, N:S:P, failover_pending, failed_over, active, active_down, node:slot:port
View all HP 3PAR StoreServ 7400 4-node manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 444 highlights
• Partner Location of failover partner port in :: format • FailoverState The failover state of the two ports indicated in the N:S:P and Partner columns. The value can be one of the following: ◦ none No failover in operation ◦ failover_pending In the process of failing over to partner. ◦ failed_over Failed over to partner ◦ active The partner port is failed over to this port ◦ active_down The partner port is failed over to this port, but this port is down ◦ failback_pending In the process of failing back from partner The following example displays hardware and connection information about the ports settings: cli% showport -i N:S:P Brand Model Rev Firmware Serial 1:2:1 3PAR FC044X 08 1.02.N.5 00981760001d6187 1:2:2 3PAR FC044X 08 1.02.N.5 00981760001d6187 1:2:3 3PAR FC044X 08 1.02.N.5 00981760001d6187 1:2:4 3PAR FC044X 08 1.02.N.5 00981760001d6187 The following example displays all devices connected to ports and information about the ports settings on node 0 slot 4: cli% showport -par 0:4:* N:S:P Connmode ConnType CfgRate MaxRate Class2 UniqNodeWwn VCN IntCoal 0:4:1 host point auto 4Gbps disabled disabled disabled enabled 0:4:2 host point auto 4Gbps disabled disabled disabled enabled 0:4:3 disk loop auto 4Gbps disabled disabled disabled enabled 0:4:4 disk loop auto 4Gbps disabled disabled disabled enabled 4 The following example displays each system ports' configuration: cli% showport -par N:S:P Connmode ConnType CfgRate MaxRate Class2 UniqNodeWwn VCN IntCoal 0:0:1 disk loop auto 2Gbps disabled disabled disabled enabled 0:0:2 disk loop auto 2Gbps disabled disabled disabled enabled 0:1:1 disk loop auto 2Gbps disabled disabled disabled enabled 0:1:2 disk loop auto 2Gbps disabled disabled disabled enabled 0:2:1 disk loop auto 2Gbps disabled disabled disabled enabled 0:2:2 disk loop auto 2Gbps disabled disabled disabled enabled 0:5:1 peer point auto 2Gbps disabled disabled disabled enabled 0:5:2 disk loop auto 2Gbps disabled disabled disabled enabled 0:5:3 disk loop auto 2Gbps disabled disabled disabled enabled 0:5:4 disk loop auto 2Gbps disabled disabled disabled enabled ... The columns in the previous example are identified as follows: • N:S:P. The physical position of the port, in the syntax node:slot:port. • Connmode.Indicates the connection mode which can be rcfc, peer, host or disk. 444 Show Commands