HP 3PAR StoreServ 7400 4-node HP 3PAR Command Line Interface Reference (OS 3.1 - Page 83

controlmag DESCRIPTION The controlmag command takes drive magazines, or disk drives within a magazine, either on loop or off loop. Use this command when replacing a drive magazine or disk drive within a drive magazine. SYNTAX controlmag offloop|onloop [options] AUTHORITY • Super, Service • Any role granted the mag_control right. NOTE: You need access to all domains in order to run this command. SUBCOMMANDS offloop|onloop Specifies that the specified drive magazine or disk drive is either taken off loop or brought back on loop. OPTIONS -disk Specifies that the operation is performed on the disk as determined by its position within the drive magazine. If not specified, the operation is performed on the entire drive magazine. -port a|b|both Specifies that the operation is performed on port A, port B, or both A and B. If not specified, the operation is performed on both ports A and B. -f Specifies that the command is forced. If this option is not used, the command requires confirmation before proceeding with its operation. SPECIFIERS Specifies the name of the drive cage. Drive cage information can be viewed by issuing the showcage command. Specifies the drive magazine number within the drive cage. Valid formats are . or (for example 1.3 or 3, respectively). RESTRICTIONS Access to all domains is required to run this command. controlmag 83