HP 3PAR StoreServ 7400 4-node HP 3PAR Command Line Interface Reference (OS 3.1 - Page 50

admitrcopytarget DESCRIPTION The admitrcopytarget command adds a target to a Remote Copy volume group. SYNTAX admitrcopytarget [:]... AUTHORITY • Super, Edit • Any role granted the rcopytarget_admit right. NOTE: You need access to all domains in order to run this command. OPTIONS None. SPECIFIERS Specifies the name of the target that was previously created with the creatercopytarget command. Specifies the mode of the target as either synchronous (sync) or asynchronous periodic (periodic). Specifies the name of the existing Remote Copy volume group created with the creatercopygroup command to which the target will be added. [:]... Specifies the mapping between the names of a volume in the primary group and the corresponding volume on the added target. This specifier must be included for every volume in the primary volume group. This specifier is not required only if the group contains no volumes. RESTRICTIONS Functionality of this command requires the HP 3PAR Remote Copy license. Contact your local service provider for further information. EXAMPLES In the following example, the admitrcopytarget command adds the target target1 in synchronous mode to volume group Group1. cli% admitrcopytarget target1 sync Group1 NOTES None. 50 Admit Commands