HP 4510s Service Guide - Page 103
secure the top cover to the computer., Remove the two Phillips PM2.0×4.0 screws
UPC - 884962592144
View all HP 4510s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
2. Disconnect the power button board cable from the system board by releasing the ZIF connector (1), and then disconnecting the cable (2). 3. Remove the 19 Phillips PM2.5×6.0 screws that secure the top cover to the computer. 4. Remove the two Phillips PM2.0×4.0 screws (1) and the three Phillips PM2.0×2.0 screws (2) that secure the top cover to the computer. Component replacement procedures 91
2.
Disconnect the power button board cable from the system board by releasing the ZIF connector
(1)
, and then disconnecting the cable
(2)
.
3.
Remove the 19 Phillips PM2.5×6.0 screws that secure the top cover to the computer.
4.
Remove the two Phillips PM2.0×4.0 screws
(1)
and the three Phillips PM2.0×2.0 screws
(2)
that
secure the top cover to the computer.
Component replacement procedures
91