HP 4510s Service Guide - Page 82
Remove the Phillips PM2.5×7.0 screw, Remove the optical drive
UPC - 884962592144
View all HP 4510s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Remove the optical drive: 1. Position the computer with the right side toward you. 2. Remove the Phillips PM2.5×7.0 screw (1) that secures the optical drive to the computer. NOTE: On 15-in models the screw is located in a hole in the top cover. See the first image below. NOTE: On 14-in models the screw is located directly below the keyboard ZIF connector. See the second image below. 3. Insert a flat-bladed screwdriver or similar tool into the optical drive tab access (2) and press the tab to the right to release the optical drive from the computer. 70 Chapter 4 Removal and replacement procedures
Remove the optical drive:
1.
Position the computer with the right side toward you.
2.
Remove the Phillips PM2.5×7.0 screw
(1)
that secures the optical drive to the computer.
NOTE:
On 15-in models the screw is located in a hole in the top cover. See the first image below.
NOTE:
On 14-in models the screw is located directly below the keyboard ZIF connector. See the
second image below.
3.
Insert a flat-bladed screwdriver or similar tool into the optical drive tab access
(2)
and press the
tab to the right to release the optical drive from the computer.
70
Chapter 4
Removal and replacement procedures