HP 6100 HP StorageWorks 4x00/6x00/8x00 Enterprise Virtual Array Updating Produ - Page 20
Switch Settings, Discover connected switches, Subnet, Read Community, Select Switch Group
View all HP 6100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
4. Click Switch Settings and enter the following information: a. Enter the IP Address of the primary switch for the SAN for which you want a report. Information will be collected for all devices connected to this switch. b. Clear Discover connected switches. This option automatically detects all switches connected to the switch identified by the IP address. Including all the connected switches increases the data collected for the report. This includes data for all the devices connected to the switch. If you want to include all the switches, leave this option selected; to include discovery of subnet switches, also select Subnet. c. Enter the switch login and password if required. The Read Community value is obtained from the switch. d. If you have created more than one fabric, use the Select Switch Group drop-down list to select the fabric to which you want to add this switch. e. Click Discover Switch to discover the switch and activate the login and password. You should see the extended switch information with IP addresses in the right-most panel. f. Click Add to add the switch to the reporting configuration. 20 Pre-upgrade tasks