HP 6100 HP StorageWorks 4x00/6x00/8x00 Enterprise Virtual Array Updating Produ - Page 59
Upgrading firmware on an individual disk, Step 7. Entering storage system passwords
View all HP 6100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Figure 21 Code Load Disk Drives - Page 3 window . 11. Click Finish. Upgrading firmware on an individual disk If it is necessary to upgrade the firmware on an individual disk, the firmware and installation instructions can be downloaded from the following website: http://www.hp.com/support/evadiskfirmware IMPORTANT: Upgrading disk drive firmware on an individual disk can be performed online or offline, unless the disk is a member of a disk group that contains Vraid0 virtual disks. If so, the disk must be ungrouped before the disk drive firmware can be upgraded. Step 7. Entering storage system passwords Estimated time to complete: 10-15 minutes NOTE: • This step is only required if you use password protection on the storage system. • When you add a system password to the controller, you must also enable password access in HP Command View EVA. The two work in conjunction with one another. Long passwords (up to 16 characters) are supported. The password must meet the following requirements: HP StorageWorks 4x00/6x00/8x00 Enterprise Virtual Array Updating Product Software Guide (XCS 6.220) 59