HP 620 Compaq 320, 321, 420, 421, 620 and 621 Notebook PCs HP 420 and 620 Not - Page 74
Processor, Following the sequence stamped into the heat sink, loosen the captive screws
UPC - 885631889732
View all HP 620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
3. Raise the end of the heat sink (3) to free it from the system board components and then remove the heat sink (4) from the system board. Remove the heat sink on computers with discrete graphics subsystems: 1. Position the computer right-side up with the front facing you. 2. Following the sequence stamped into the heat sink, loosen the captive screws (1) and (2) around the processor. 3. Lift the heat sink (3) from the system board. Processor NOTE: The processor spare part kit includes replacement thermal material. 66 Chapter 4 Removal and replacement procedures
3.
Raise the end of the heat sink
(3)
to free it from the system board components and then remove
the heat sink
(4)
from the system board.
Remove the heat sink on computers with discrete graphics subsystems:
1.
Position the computer right-side up with the front facing you.
2.
Following the sequence stamped into the heat sink, loosen the captive screws
(1)
and
(2)
around
the processor.
3.
Lift the heat sink
(3)
from the system board.
Processor
NOTE:
The processor spare part kit includes replacement thermal material.
66
Chapter 4
Removal and replacement procedures