HP A3550A User Manual - A3661-90001 - Page 185

Host-Based Support Tools Table 5-6 Firmware Update Tool Menu Items and Descriptions Menu Item Option Property Description Select File... filename Specifies the microcode or firmware file to be used. Save As... filename Saves a file using a user-specified name. File Print... N/A Prints a file. Exit... N/A Current N/A Revisions List File Selection N/A Exits the Firmware Update Tool. Lists SP microcode and disk module firmware revisions currently in use (Figure 5-7). Reports the file previously specified using the Select File option on the File menu. Update Instructions Controller Firmware N/A Download, update PROM and restart controllers Download and restart controllers Download only Restart controllers only Lists basic instructions for Firmware Update Tool use. Downloads microcode to the disk array's database drives, burns PROM code contained in the download file to the SP's PROMs, and restarts the SP using the new microcode. Downloads microcode to the disk array's database drives and restarts the SP using the new microcode. Downloads microcode to the disk array's database drives, but does not take effect until the SPs are restarted (with a Restart Controllers only command, or by power cycling the disk array). Restarts the SPs, using microcode residing on the database drives. Disk Firmware N/A Supplies firmware to all compatible disk modules within the disk array (that is, those with the same product ID). This applies even to disk modules owned by another SP. The firmware then resides permanently within those disk modules until another disk module firmware update is performed. Support Tools Manager (STM) 5-13