HP A3550A User Manual - A3661-90001 - Page 310

Table 6-14 Most Common Microcode Panic Codes (Continued) Value Description 0x00E00000 0x00E0000C 0x00F20009 I/O from cache and firmware timing issue. The microcode would occasionally panic with a 0x00E00000/0x00E0000C code during normal operating conditions. The panic was a result of communication problems between the two SPs in a mirrored caching array. Fixed in microcode revision 8.55. Executing I/O exclusively to and from cache for an extended period of time (>5 seconds) could result in a panic 0x00E00000 with extended status code 0x00E0000C. Fixed in microcode revisions 8.26 to 8.56. Panic 0x00E00000 and 0x00E0000D were caused by a firmware related timing issue under heavy I/O activity. Fixed in microcode revisions 8.27, 8.58, and 9.04. Incorrect state reported by peer. (Reference the 0x0080007E code.) Uninitialized NovRAM. The contents of the nonvolatile RAM on the controller indicate that the NovRAM does not contain valid information. The controller automatically initializes the NovRAM to a valid state after this error is reported. 6-62 Unsolicited Event Log