HP A3550A User Manual - A3661-90001 - Page 292

Table 6-8 Informational Codes (Continued) Event code Event code name Description 0x6E2 Front End Fibre Loop Error The SP's fibre loop failed to initialize. 0x6E3 0x6E4 0x6E5 Fibre Channel Initiator Gone Fibre Channel Loop Down Fibre Channel Loop Up The SP tried to communicate with an initiator that is no longer responding. A loop down was detected. This is a normal occurrence followed by a loop up during loop initialization. The fibre loop is up and ready for communication. 0x6E6 Fibre Channel Loop Timeout An internal timeout has occurred in the fibre channel interface. The SP will wait for the condition to clear and then resume operation. 0x6E7 0x6E8 0x6E9 Fibre Channel LIP Timeout Fibre Channel Link Up Timeout Front End Fibre Loop Event The Fibre Channel interface timed out during loop initialization. The SP will continue taking action to bring the link completely up. The Fibre Channel interface timed out waiting for the link to come up. The SP will continue taking action to bring the link completely up. Front End fibre loop error message threshold exceeded. Table 6-9 Thresholded (Soft) Codes Event code Event code name Description Recommended threshold 0x801 0x802 Soft SCSI Error Illegal SCSI Bus Interrupt An abnormal SCSI bus or disk drive event was detected. A retry of the operation cleared the condition. An inconsistent interrupt situation has been detected on the SP. Notify the user after 25 errors per day per FRU. Notify the user after 10 errors per month per FRU. 0x803 0x804 Recommend Disk Replacement Single Bit Error The disk module has sent status to the SP indicating that the disk may be susceptible to a fault in the near future. (IBM disk modules only.) Replace the disk module. The SP's tolerance level for single bit errors in the write cache has been exceeded. 6-44 Unsolicited Event Log