HP AA988A HP StorageWorks 2012sa Modular Smart Array user guide (488320-002, J - Page 16
Table 1-4, Controller Ports and Switches Back View
UPC - 829160184661
View all HP AA988A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Figure 1-2 shows the ports and switches at the back of the controller enclosure. Power switch Host ports MUI (Service) port CLI port Ethernet port Expansion port Figure 1-2 Controller Ports and Switches (Back View) Table 1-4 describes the ports and switches on the back of the controller. Table 1-4 Controller Ports and Switches (Back) Location Power-andcooling module Controller module Controller module Controller module Controller module Controller module Port/Switch Description Power switch On/Off toggle Host ports 3-Gbps, 4-lane SAS ports (12 Gbps total) used to connect to data hosts. Host port 0 and 1 correspond to host channel 0 and 1, respectively. Expansion port 3-Gbps, 4-lane (12 Gbps total) table-routed SAS Out port used to connect drive enclosures. Ethernet port 10/100BASE-T Ethernet port used for TCP/IP-based out-of-band management of the RAID controller. An internal Ethernet device provides standard 10 Mbit/second and 100 Mbit/second full-duplex connectivity. CLI port Micro-DB9 port used to connect the controller enclosure to a local management host using RS-232 communication for out-of-band configuration and management. MUI 3.5-mm jack port used by service personnel only. (Service) port 16 HP StorageWorks 2012sa Modular Smart Array user guide • May 2008