HP AA988A HP StorageWorks 2012sa Modular Smart Array user guide (488320-002, J - Page 43
Table 4-1, Terminal Emulator Display Settings
UPC - 829160184661
View all HP AA988A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Your package contents include a micro-DB9-to-DB9 serial cable. If necessary, use a DB9-to-DB25 adapter (not included) for connecting the serial cable to a DB25 serial port on the host computer. 3. Start and configure a terminal emulator, such as HyperTerminal or VT-100, using the display settings in Table 4-1 and the connection settings in Table 4-2. Table 4-1 Terminal Emulator Display Settings Parameter Value Terminal Emulation Mode VT-100 or ANSI (for color support) Font Terminal Translations None Columns 80 Table 4-2 Terminal Emulator Connection Settings Parameter Connector Baud rate (bits/sec) Data bits Parity Stop bits Flow control Value COM1 (typically) 115,200 8 None 1 None Chapter 4 Configuring a System for the First Time 43
Chapter 4
Configuring a System for the First Time
43
Your package contents include a micro-DB9-to-DB9 serial cable. If necessary, use a
DB9-to-DB25 adapter (not included) for connecting the serial cable to a DB25
serial port on the host computer.
3.
Start and configure a terminal emulator, such as HyperTerminal or VT-100, using
the display settings in Table 4-1 and the connection settings in Table 4-2.
Table 4-1
Terminal Emulator Display Settings
Parameter
Value
Terminal Emulation Mode
VT-100 or ANSI (for color support)
Font
Terminal
Translations
None
Columns
80
Table 4-2
Terminal Emulator Connection Settings
Parameter
Value
Connector
COM1 (typically)
Baud rate (bits/sec)
115,200
Data bits
8
Parity
None
Stop bits
1
Flow control
None