HP AA988A HP StorageWorks 2012sa Modular Smart Array user guide (488320-002, J - Page 28
Installing Enclosures Into a Rack, Preparing the Rack
UPC - 829160184661
View all HP AA988A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Installing Enclosures Into a Rack This section describes how to install the enclosures into a standard 19-inch rack cabinet with a 28 to 36-inch (71.12 to 91.44-cm) depth. Tip - To help you correctly identify the screws, keep all hardware items in plastic bags until you are ready to use them. Preparing the Rack Before installing enclosures in a rack cabinet, ensure the rack is installed according to its installation instructions and that the installation complies with local safety codes. 1. Stabilize the rack as described in its documentation. 2. If the rack has casters, make sure the casters are locked to prevent the rack from rolling. 3. Remove or open the top front panel and the vented back panel. Assembling and Installing the Rackmount Bracket Kit Note - If the rackmount bracket kit you are installing includes assembly instructions, use them in place of the instructions in this guide. 28 HP StorageWorks 2012sa Modular Smart Array user guide • May 2008