HP AE326A HP StorageWorks 1500 Modular Smart Array maintenance and service gui - Page 27
Fibre Channel I/O module LEDs, initiation of a reset, hot-plug of Fibre Channel I/O module
UPC - 882780184954
View all HP AE326A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Fibre Channel I/O module LEDs The Fibre Channel I/O module has three bi-color LEDs. the following figure and table describe their locations and meanings. 1 2 3 15506 Item Name 1 Status Condition Off Color - Description Power not applied to Fibre Channel I/O module, controller not plugged in, or unsuccessful controller POST Solid Green Power applied and connection established between Fibre Channel I/O module and Fibre Channel controller Blinking Amber Power is applied but there is no link to the controller or there is no controller present 2 1-Gb link status Solid Green A 1-Gb link is established and the status is good Blinking Amber A 1-Gb link was established but is now inactive 3 2-Gb link status Solid Green A 2-Gb link is established and the status is good Blinking Amber A 2-Gb link was established but is now inactive NOTE: If both link status lights are Off, a link has not been established since the application of power, initiation of a reset, hot-plug of Fibre Channel I/O module, removal of the transceiver, or hot-plug of the transceiver. If both link status lights are blinking amber, the MSA controller has been removed or a link cannot be established. maintenance and service guide 27