HP Business Inkjet 2200/2250 HP Business InkJet 2200/2250 Printer - (English) - Page 42
In the IPX/SPX menu for Token Ring, BOOTP=YES for TCP/IP parameters
View all HP Business Inkjet 2200/2250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Message IPX/SPX DLC/LLC TCP/IP ETALK CFG IPX/SPX CFG TCP/IP Value ON OFF Description Selects whether or not a protocol is enabled or disabled. Change it to OFF to disable a protocol. NO Selects whether you want to access the YES IPX/SPX menu and set the IPX/SPX protocol parameters. In the IPX/SPX menu, you can specify the Frame Type parameter used on your network. • The default is AUTO, which automatically sets and limits the Frame type to the one detected. • For Ethernet cards, frame type selections include EN_8023, EN_II, EN_8022, EN_SNAP. • For Token Ring cards, frame type selections include TR_8022, TR_SNAP. In the IPX/SPX menu for Token Ring cards, you can also specify NetWare Source Routing parameters, which include SRC RT=AUTO (default), OFF, SINGLE R or ALL RT. NO Selects whether you want to access the YES TCP/IP menu and set the TCP/IP protocol parameters. In the TCP/IP menu, you can specify BOOTP=YES for TCP/IP parameters to be automatically configured by a BootP or DHCP server when the printer is turned on. If you specify BOOTP=NO, you can manually set the following TCP/IP parameters from the control panel: Each byte of the IP address (IP) • Subnet Mask (SM) • Syslog Server (LG) • Default Gateway (GW) • Idle Timeout period (default is 90 seconds, 0 disables the timeout) When setting IP numbers, press the Value button to increase the number by 1. Hold down the Value button to increase the number by 10. 2. Press the Resume button to make your selection. 6-4