HP Cisco Catalyst Blade Switch 3020 Cisco Catalyst Blade Switch 3020 for HP Co - Page 239
mls qos srr-queue output dscp-map
View all HP Cisco Catalyst Blade Switch 3020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 239 highlights
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands mls qos srr-queue output dscp-map mls qos srr-queue output dscp-map Use the mls qos srr-queue output dscp-map global configuration command to map Differentiated Services Code Point (DSCP) values to an egress or to map DSCP values to a queue and to a threshold ID. Use the no form of this command to return to the default setting. mls qos srr-queue output dscp-map queue queue-id {dscp1...dscp8 | threshold threshold-id dscp1...dscp8} no mls qos srr-queue output dscp-map Syntax Description queue queue-id dscp1...dscp8 threshold threshold-id dscp1...dscp8 Specify a queue number. For queue-id, the range is 1 to 4. Map DSCP values to an egress queue. For dscp1...dscp8, enter up to eight values, and separate each value with a space. The range is 0 to 63. Map DSCP values to a queue threshold ID. For threshold-id, the range is 1 to 3. For dscp1...dscp8, enter up to eight values, and separate each value with a space. The range is 0 to 63. Defaults Table 2-13 shows the default DSCP output queue threshold map: Table 2-13 Default DSCP Output Queue Threshold Map DSCP Value 0-15 16-31 32-39 40-47 48-63 Queue ID-Threshold ID 2-1 3-1 4-1 1-1 4-1 Command Modes Global configuration Command History Release 12.2(25)SEF Modification This command was introduced. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-211