HP Cisco Catalyst Blade Switch 3020 Cisco Catalyst Blade Switch 3020 for HP Co - Page 467
spanning-tree cost
View all HP Cisco Catalyst Blade Switch 3020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 467 highlights
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands spanning-tree cost spanning-tree cost Use the spanning-tree cost interface configuration command to set the path cost for spanning-tree calculations. If a loop occurs, spanning tree considers the path cost when selecting an interface to place in the forwarding state. Use the no form of this command to return to the default setting. spanning-tree [vlan vlan-id] cost cost no spanning-tree [vlan vlan-id] cost Syntax Description vlan vlan-id cost (Optional) VLAN range associated with a spanning-tree instance. You can specify a single VLAN identified by VLAN ID number, a range of VLANs separated by a hyphen, or a series of VLANs separated by a comma. The range is 1 to 4094. Path cost. The range is 1 to 200000000, with higher values meaning higher costs. Defaults The default path cost is computed from the interface bandwidth setting. These are the IEEE default path cost values: • 1000 Mbps-4 • 100 Mbps-19 • 10 Mbps-100 Command Modes Interface configuration Command History Release 12.2(25)SEF Modification This command was introduced. Usage Guidelines When you configure the cost, higher values represent higher costs. If you configure an interface with both the spanning-tree vlan vlan-id cost cost command and the spanning-tree cost cost command, the spanning-tree vlan vlan-id cost cost command takes effect. Examples This example shows how to set the path cost to 250 on a port: Switch(config)# interface gigabitethernet0/21 Switch(config-if)# spanning-tree cost 250 This example shows how to set a path cost to 300 for VLANs 10, 12 to 15, and 20: Switch(config-if)# spanning-tree vlan 10,12-15,20 cost 300 You can verify your settings by entering the show spanning-tree interface interface-id privileged EXEC command. OL-8916-01 Cisco Catalyst Blade Switch for HP Command Reference 2-439