HP Cisco Catalyst Blade Switch 3020 Cisco Catalyst Blade Switch 3020 for HP Co - Page 456
snmp-server host, Optional Con the User Datagram Protocol UDP port number of
View all HP Cisco Catalyst Blade Switch 3020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 456 highlights
snmp-server host Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands snmp-server host Use the snmp-server host global configuration command to specify the recipient (host) of a Simple Network Management Protocol (SNMP) notification operation. Use the no form of this command to remove the specified host. snmp-server host host-addr [informs | traps] [version {1 | 2c | 3 {auth | noauth| priv}] [vrf vrf-instance] {community-string [notification-type]} no snmp-server host host-addr [informs | traps] [version {1 | 2c | 3 {auth | noauth | priv}] [vrf vrf-instance] community-string Syntax Description host-addr udp-port port informs | traps version 1 | 2c | 3 vrf vrf-instance Name or Internet address of the host (the targeted recipient). (Optional) Configure the User Datagram Protocol (UDP) port number of the host to receive the traps. The range is 0 to 65535. (Optional) Send SNMP traps or informs to this host. (Optional) Version of the SNMP used to send the traps. These keywords are supported: 1-SNMPv1. This option is not available with informs. 2c-SNMPv2C. 3-SNMPv3. These optional keywords can follow the Version 3 keyword: • auth (Optional). Enables Message Digest 5 (MD5) and Secure Hash Algorithm (SHA) packet authentication. • noauth (Default). The noAuthNoPriv security level. This is the default if the [auth | noauth | priv] keyword choice is not specified. • priv (Optional). Enables Data Encryption Standard (DES) packet encryption (also called privacy). Note The priv keyword is available only when the cryptographic (encrypted) software image is installed. (Optional) Virtual private network (VPN) routing instance and name for this host. 2-428 Cisco Catalyst Blade Switch for HP Command Reference OL-8916-01