HP Cisco Catalyst Blade Switch 3020 Cisco Catalyst Blade Switch 3020 for HP Co - Page 448
Summary Advts Received, Number of Existing
View all HP Cisco Catalyst Blade Switch 3020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 448 highlights
show vtp Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Table 2-30 show vtp counters Field Descriptions (continued) Field Number of V1 summary errors Join Transmitted Join Received Summary Advts Received from non-pruning-capable device Description Number of Version 1 errors. Version 1 summary errors increment whenever a switch in VTP V2 mode receives a VTP Version 1 frame. These errors mean that at least one neighboring switch is either running VTP Version 1 or VTP Version 2 with V2-mode disabled. To solve this problem, change the configuration of the switches in VTP V2-mode to disabled. Number of VTP pruning messages sent on the trunk. Number of VTP pruning messages received on the trunk. Number of VTP summary messages received on the trunk from devices that do not support pruning. This is an example of output from the show vtp status command. Table 2-31 describes each field in the display. Switch> show vtp status VTP Version : 2 Configuration Revision : 0 Maximum VLANs supported locally : 1005 Number of existing VLANs : 45 VTP Operating Mode : Transparent VTP Domain Name : shared_testbed1 VTP Pruning Mode : Disabled VTP V2 Mode : Disabled VTP Traps Generation : Enabled MD5 digest : 0x3A 0x29 0x86 0x39 0xB4 0x5D 0x58 0xD7 Table 2-31 show vtp status Field Descriptions Field VTP Version Configuration Revision Maximum VLANs Supported Locally Number of Existing VLANs Description Displays the VTP version operating on the switch. By default, the switch implements Version 1 but can be set to Version 2. Current configuration revision number on this switch. Maximum number of VLANs supported locally. Number of existing VLANs. 2-422 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01