HP Cisco Catalyst Blade Switch 3020 Cisco Catalyst Blade Switch 3020 for HP Co - Page 251
mvr (interface configuration
View all HP Cisco Catalyst Blade Switch 3020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 251 highlights
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands mvr (interface configuration) mvr (interface configuration) Use the mvr interface configuration command to configure a Layer 2 port as a multicast VLAN registration (MVR) receiver or source port, to set the Immediate Leave feature, and to statically assign a port to an IP multicast VLAN and IP address. Use the no form of this command to return to the default settings. mvr [immediate | type {receiver | source} | vlan vlan-id group [ip-address]] no mvr [immediate | type {source | receiver}| vlan vlan-id group [ip-address]] Syntax Description immediate type receiver source vlan vlan-id group ip-address (Optional) Enable the Immediate Leave feature of MVR on a port. Use the no mvr immediate command to disable the feature. (Optional) Configure the port as an MVR receiver port or a source port. The default port type is neither an MVR source nor a receiver port. The no mvr type command resets the port as neither a source or a receiver port. Configure the port as a subscriber port that can only receive multicast data. Receiver ports cannot belong to the multicast VLAN. Configure the port as an uplink port that can send and receive multicast data for the configured multicast groups. All source ports on a switch belong to a single multicast VLAN. (Optional) Add the port as a static member of the multicast group with the specified VLAN ID. The no mvr vlan vlan-id group command removes a port on a VLAN from membership in an IP multicast address group. (Optional) Statically configure the specified MVR IP multicast group address for the specified multicast VLAN ID. This is the IP address of the multicast group that the port is joining. Defaults A port is configured as neither a receiver nor a source. The Immediate Leave feature is disabled on all ports. No receiver port is a member of any configured multicast group. Command Modes Interface configuration Command History Release 12.2(25)SEF Modification This command was introduced. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-223