HP Cisco Catalyst Blade Switch 3020 Cisco Catalyst Blade Switch 3020 for HP Co - Page 275
radius-server host
View all HP Cisco Catalyst Blade Switch 3020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 275 highlights
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands radius-server host radius-server host Use the radius-server host global configuration command to configure the RADIUS server parameters, including the RADIUS accounting and authentication. Use the no form of this command to return to the default settings. radius-server host ip-address [acct-port udp-port] [auth-port udp-port] [key string] [test username name [idle-time time] [ignore-acct-port] [ignore-auth-port]] no radius-server host ip-address Syntax Description ip-address acct-port udp-port auth-port udp-port key string test username name idle-time time ignore-acct-port ignore-auth-port Specify the IP address of the RADIUS server. (Optional) Specify the UDP port for the RADIUS accounting server. The range is from 0 to 65536. (Optional) Specify the UDP port for the RADIUS authentication server. The range is from 0 to 65536. (Optional) Specify the authentication and encryption key for all RADIUS communication between the switch and the RADIUS daemon. (Optional) Enable automatic server testing of the RADIUS server status, and specify the username to be used. (Optional) Set the interval of time in minutes after which the switch sends test packets to the server. The range is from 1 to 35791 minutes. (Optional) Disables testing on the RADIUS-server accounting port. (Optional) Disables testing on the RADIUS-server authentication port. Defaults The UDP port for the RADIUS accounting server is 1646. The UDP port for the RADIUS authentication server is 1645. Automatic server testing is disabled. The idle time is 60 minutes (1 hour). When the automatic testing is enabled, testing occurs on the accounting and authentication UDP ports. The authentication and encryption key (string) is not configured. Command Modes Global configuration Command History Release 12.2(25)SEE 12.2(25)SEF Modification This command was introduced. This command was introduced. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-247