HP Cisco Catalyst Blade Switch 3020 Cisco Catalyst Blade Switch 3020 for HP Co - Page 50

boot enable-break Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands boot enable-break Use the boot enable-break global configuration command to enable interrupting the automatic boot process. Use the no form of this command to return to the default setting. boot enable-break no boot enable-break Syntax Description This command has no arguments or keywords. Defaults Disabled. The automatic boot process cannot be interrupted by pressing the Break key on the console. Command Modes Global configuration Command History Release 12.2(25)SEF Modification This command was introduced. Usage Guidelines When you enter this command, you can interrupt the automatic boot process by pressing the Break key on the console after the flash file system is initialized. Note Despite the setting of this command, you can interrupt the automatic boot process at any time by pressing the MODE button on the switch front panel. This command changes the setting of the ENABLE_BREAK environment variable. For more information, see Appendix A, "Cisco Catalyst Switch 3020 for HP Boot Loader Commands." Related Commands Command show boot Description Displays the settings of the boot environment variables. 2-22 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01