HP Cisco Nexus 5000 Cisco Nexus 5000 Series Switch CLI Software Configuration - Page 62

SSH Connection Accessing the Command Line Interface Step 2 Step 3 At the switch login prompt, enter your username and password. The Cisco Nexus 5000 Series switch initiates authentication. Note If no password has been configured, press Return. Exit the session when finished. switch# exit This example shows how to make a Telnet connection to a switch: host$ telnet 10.0.13.42 Trying 10.0.13.42... Connected to 10.0.13.42 Escape character is '^]'. switch Login: admin Password: password ... switch# exit SSH Connection You can make an SSH connection to a Cisco Nexus 5000 Series switch. Before You Begin Correctly set the console port parameters. Procedure Step 1 Make an SSH connection from your host to the switch that you want to access. host$ ssh [-D port] {[user@] hostname | ip_addr} Step 2 Step 3 At the switch login prompt, enter your username and password. The Cisco Nexus 5000 Series switch initiates authentication. Note If no password has been configured, press Return. Exit the session when finished. switch# exit This example shows how to make an SSH connection to a switch: host$ ssh 10.0.13.42 The authenticity of host '(10.0.13.42)' can't be established. RSA key fingerprint is 53:b4:ad:c8:51:17:99:4b:c9:08:ac:c1:b6:05:71:9b. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '10.0.13.42' (RSA) to the list of known hosts. switch Login: admin Password: password ... switch# exit Cisco Nexus 5000 Series Switch CLI Software Configuration Guide 16 OL-16597-01