HP Cisco Nexus 5000 Cisco Nexus 5000 Series Switch CLI Software Configuration - Page 664

Verifying Interoperating Status Advanced Fibre Channel Features and Concepts Note The Cisco Nexus 5000 Series, Brocade, and McData FC Error Detect (ED_TOV) and Resource Allocation (RA_TOV) timers default to the same values. They can be changed if needed. The RA_TOV default is 10 seconds, and the ED_TOV default is 2 seconds. Per the FC-SW2 standard, these values must be the same on each switch within the fabric. switch(config)# fctimer e_d_tov ? E_D_TOV in milliseconds(1000-100000) switch(config)# fctimer r_a_tov ? R_A_TOV in milliseconds(5000-100000) Step 4 When making changes to the domain, you may or may not need to restart the domain manager function for the altered VSAN. • Force a fabric reconfiguration with the disruptive option. switch(config)# fcdomain restart disruptive vsan 1 or • Do not force a fabric reconfiguration. switch(config# fcdomain restart vsan 1 Verifying Interoperating Status This section highlights the commands used to verify if the fabric is up and running in interoperability mode. To verify the resulting status of entering the interoperability command in any switch in the Cisco Nexus 5000 Series, perform this task: Procedure Step 1 Verify the software version. Example: switch# show version Cisco Nexus Operating System (NX-OS) Software TAC support: http://www.cisco.com/tac Copyright (c) 2002-2008, Cisco Systems, Inc. All rights reserved. The copyrights to certain works contained herein are owned by other third parties and are used and distributed under license. Some parts of this software are covered under the GNU Public License. A copy of the license is available at http://www.gnu.org/licenses/gpl.html. Cisco Nexus 5000 Series Switch CLI Software Configuration Guide 618 OL-16597-01