HP Cisco Nexus 5000 Cisco Nexus 5000 Series Switch CLI Software Configuration - Page 69

Using Commands Using Keyboard Shortcuts If you enter the zone member command, you can undo the results: switch(config)# zone name test vsan 1 switch(config-zone)# member pwwn 12:12:12:12:12:12:12:12 switch(config-zone)# no member pwwn 12:12:12:12:12:12:12:12 WARNING: Zone is empty. Deleting zone test. Exit the submode. switch(config-zone)# • Delete a created facility. If you want to delete a zone that you created, enter the following commands: switch(config)# zone name test vsan 1 switch(config-zone)# exit switch(config)# no zone name test vsan 1 switch(config)# You cannot delete a zone facility called test while still in zone configuration submode. You must first exit the zone submode and return to configuration mode. • Revert to the default value. If you enter the zone merge-control restrict vsan command, you can undo the results: switch(config)# zone merge-control restrict vsan 10 switch(config)# no zone merge-control restrict vsan 10 switch(config)# Using Keyboard Shortcuts You can execute an EXEC mode command from a configuration mode or submode prompt. You can enter this command from any submode within the configuration mode. The command is executed at the EXEC level, and the prompt resumes its current mode level, as in the following example: switch(config)# terminal session-timeout 0 In this example, terminal session-timeout is an EXEC mode command. The following table lists some useful command keys that can be used in both EXEC and configuration modes. Table 4: Useful Command Keys Command Ctrl-P Description Up history Ctrl-N Down history Ctrl-X-H List history Alt-P Alt-N History search backwards Note The difference between Tab completion and Alt-P or Alt-N is that pressing Tab completes the current word, while Alt-P and Alt-N completes a previously entered command. History search forwards OL-16597-01 Cisco Nexus 5000 Series Switch CLI Software Configuration Guide 23