HP Color LaserJet Professional CP5220 HP Color LaserJet CP5220 Series - Softwa - Page 117
Disable SNMP v1 default Get, Con Get Community name
![]() |
View all HP Color LaserJet Professional CP5220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Enable SNMP v1 read-only access Select this option to enable the SNMP v1 agents on the HP Color LaserJet CP5220 (uses "public" for the Get Community Series printer, but limit access to read-only. Write-access is disabled. The default value) Get Community name "public" is automatically enabled. Set Community name: Type the SNMP Set Community Name (password) to allow SNMP information to be configured (or written) on the printer. Configure Get Community name: Disable SNMP v1 default Get Community name of "public": Select this option to disable the default Get community name "public". After selecting this option, type the values in the Get Community name and Confirm Get Community name fields. Disable SNMP v1 Select this option to disable the SNMP v1 agents on the HP Color LaserJet CP5220 Series printer, which is recommended for secure environments. If SNMP v1 is disabled, some port monitors or discovery utilities might not operate properly. Apply Click Apply to make the changes take effect. ENWW HP Embedded Web Server 97
![](/manual_guide/products/hewlettpackard-color-laserjet-professional-cp5220-hp-color-laserjet-cp5220-series-software-technical-reference-a685f22/117.png)