HP DL560 ProLiant DL560 Server Maintenance and Service Guide - Page 18
Removing the Server from the Rack, Removing the Access Panel, front of the rack.
UPC - 808736876919
View all HP DL560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
18 HP ProLiant DL560 Server Maintenance and Service Guide a. Press the server rail-release latches and slide the server fully into rack. b. Secure the server by tightening the thumbscrews. Removing the Server from the Rack To remove the server from a Compaq branded, telco, or third-party rack: 1. Power down the server ("Powering Down the Server" on page 16). 2. Loosen the front panel thumbscrews that secure the server faceplate to the front of the rack. 3. Disconnect the cabling and remove the server from the rack. Reverse the server installation steps in the documentation that ships with the rackmounting option. 4. Place the server on a sturdy, level surface. Removing the Access Panel WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system components to cool before touching them.