HP DL560 ProLiant DL560 Server Maintenance and Service Guide - Page 57
Rear Fan Bracket
UPC - 808736876919
View all HP DL560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Removal and Replacement Procedures 57 14. Remove the system board. NOTE: The system board spare kit does not includes DIMMs, processors, PPMs, or the Smart Array 5i memory module. To replace the component, reverse the removal procedure. IMPORTANT: If replacing the system board or clearing NVRAM, you must re-enter the server serial number through RBSU ("Re-Entering the Server Serial Number" on page 58). Rear Fan Bracket To remove the component: 1. Remove the system board ("System Board" on page 54). NOTE: When removing the system board, you may leave the DIMMs, the PPMs, the Smart Array 5i memory module, and the system battery on the system board, unless you are replacing them as failed items.
Removal and Replacement Procedures
57
14. Remove the system board.
NOTE:
The system board spare kit does not includes DIMMs,
processors, PPMs, or the Smart Array 5i memory module.
To replace the component, reverse the removal procedure.
IMPORTANT:
If replacing the system board or clearing NVRAM, you
must re-enter the server serial number through RBSU ("Re-Entering the
Server Serial Number" on page
58
).
Rear Fan Bracket
To remove the component:
1.
Remove the system board ("System Board" on page
54
).
NOTE:
When removing the system board, you may leave the DIMMs,
the PPMs, the Smart Array 5i memory module, and the system battery
on the system board, unless you are replacing them as failed items.