HP DL560 ProLiant DL560 Server Maintenance and Service Guide - Page 83
Position, Default, Function, number through RBSU Re-Entering the Server Serial Number
UPC - 808736876919
View all HP DL560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Server Component Identification 83 Position Default Function S5 Off Off = Power-on password is enabled. On = Power-on password is disabled. S6 Off Off = No function. On = Clear NVRAM*. S7 Off Off = iLO security is enabled. On = iLO security is disabled. S8 Off Off = Processor hot-spare boot is enabled. On = Processor hot-spare boot is disabled. NOTE: To access the redundant ROM using the system maintenance switch, refer to "Access to Redundant ROM Settings." * If you clear NVRAM, you must re-enter the server serial number through RBSU ("Re-Entering the Server Serial Number" on page 58).
Server Component Identification
83
Position
Default
Function
S5
Off
Off = Power-on password is enabled.
On = Power-on password is disabled.
S6
Off
Off = No function.
On = Clear NVRAM*.
S7
Off
Off = iLO security is enabled.
On = iLO security is disabled.
S8
Off
Off = Processor hot-spare boot is
enabled.
On = Processor hot-spare boot is
disabled.
NOTE:
To access the redundant ROM using the system
maintenance switch, refer to "Access to Redundant ROM
Settings."
* If you clear NVRAM, you must re-enter the server serial
number through RBSU ("Re-Entering the Server Serial Number"
on page
58
).