HP DL560 ProLiant DL560 Server Maintenance and Service Guide - Page 50
SCSI Backplane
UPC - 808736876919
View all HP DL560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
50 HP ProLiant DL560 Server Maintenance and Service Guide 4. Disconnect and remove the SCSI cable. To replace the component, reverse the removal procedure. SCSI Backplane To remove the component: 1. Power down the server ("Powering Down the Server" on page 16). 2. Extend or remove the server from the rack ("Extending the Server from the Rack" on page 17, "Removing the Server from the Rack" on page 18). 3. Remove the access panel ("Removing the Access Panel" on page 18). 4. Remove all hot-plug SCSI hard drives ("Hot-Plug SCSI Hard Drive" on page 19). 5. Remove the tape drive, if installed ("Universal Hot-Plug Tape Drive" on page 23).
50
HP ProLiant DL560 Server Maintenance and Service Guide
4.
Disconnect and remove the SCSI cable.
To replace the component, reverse the removal procedure.
SCSI Backplane
To remove the component:
1.
Power down the server ("Powering Down the Server" on page
16
).
2.
Extend or remove the server from the rack ("Extending the Server from the
Rack" on page
17
, "Removing the Server from the Rack" on page
18
).
3.
Remove the access panel ("Removing the Access Panel" on page
18
).
4.
Remove all hot-plug SCSI hard drives ("Hot-Plug SCSI Hard Drive" on page
19
).
5.
Remove the tape drive, if installed ("Universal Hot-Plug Tape Drive" on
page
23
).