HP Dc7100 Hardware Reference Guide -- HP Compaq Business Desktops dc7100 Conve - Page 52
Inserting a Drive into the MultiBay, After inserting an optical drive while the computer is turned - video driver
UPC - 829160356877
View all HP Dc7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Hardware Upgrades Inserting a Drive into the MultiBay 1. Remove any removable media, such as a CD, from the drive. 2. If you are not hot-swapping a CD-ROM drive, exit all software applications, shut down the operating system software, and turn off the computer. 3. With the top of the drive facing up and the drive connector facing the computer, slide the drive into the MultiBay and push firmly to ensure that the electrical connector is properly seated. Inserting a Drive into the MultiBay 4. After inserting an optical drive while the computer is turned on, restart the computer to ensure the optical drive functions correctly if it uses recording, backup, or video playback software applications. 5. Install the MultiBay security screw, if desired. Refer to "Uninstalling the MultiBay Security Screw" for more information. If the device does not start, ensure that the necessary device drivers are installed on the system. If they are not available, they may be downloaded, at no cost, from the HP Web site at www.hp.com. 2-36 www.hp.com Hardware Reference Guide