HP Designjet Z5200 HP Designjet Z5200ps Photo Printer - Using your printer - Page 40

Paper menu procedure

Page 40 highlights

8. Select your paper category and type. TIP: If you have loaded a paper type whose name does not appear in the paper list, see The paper type is not in the driver on page 134. 9. The printer checks the alignment and measures the width. It cuts a strip off the leading edge of glossy or satin paper to ensure perfect quality; other paper types are not cut. 10. Look at the front panel; you may find some instructions there. 11. When the roll is aligned, the front panel displays the Ready message and the printer is ready to print. If the roll is not aligned, follow the instructions on the front-panel display. 12. If the paper is loose on the roll, lightly rewind from the end of the spindle until tight. Paper handling NOTE: If you have an unexpected issue at any stage of the paper loading process, see The paper cannot be loaded successfully on page 133. TIP: When prints fall into the basket, they can be torn or marked by ink from other prints. To avoid this, catch your prints as they are cut from the roll and do not stack prints in the basket. Alternatively, turn off the automatic cutter, see Turn the automatic cutter on and off on page 42, and use the Form feed and cut key to release your print. Paper menu procedure As an alternative you can use the paper menu to start the paper loading process. 1. Follow steps 1 through 5 of the easy loading procedure. 2. From the front panel, select the Paper menu icon . 30 Chapter 4 Paper handling ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197

8.
Select your paper category and type.
TIP:
If you have loaded a paper type whose name does not appear in the paper list, see
The
paper type is not in the driver
on page
134
.
9.
The printer checks the alignment and measures the width. It cuts a strip off the leading edge of
glossy or satin paper to ensure perfect quality; other paper types are not cut.
10.
Look at the front panel; you may find some instructions there.
11.
When the roll is aligned, the front panel displays the
Ready
message and the printer is ready to
print. If the roll is not aligned, follow the instructions on the front-panel display.
12.
If the paper is loose on the roll, lightly rewind from the end of the spindle until tight.
NOTE:
If you have an unexpected issue at any stage of the paper loading process, see
The paper
cannot be loaded successfully
on page
133
.
TIP:
When prints fall into the basket, they can be torn or marked by ink from other prints. To avoid
this, catch your prints as they are cut from the roll and do not stack prints in the basket. Alternatively,
turn off the automatic cutter, see
Turn the automatic cutter on and off
on page
42
, and use the
Form
feed and cut
key to release your print.
Paper menu procedure
As an alternative you can use the paper menu to start the paper loading process.
1.
Follow steps
1
through
5
of the easy loading procedure.
2.
From the front panel, select the Paper menu icon
.
30
Chapter 4
Paper handling
ENWW
Paper handling