HP Integrity Superdome SX1000 Internal Cabling Guide for HP Smart Array Contro - Page 66
Recabling for RAID, The LAN/SCSI board in PCI slot 3 has a SCSI connector cabled to physical drives
View all HP Integrity Superdome SX1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Cabling for the HP Integrity rx5670 Server Recabling for RAID Recabling for RAID From the factory, the internal hot plug drives for the HP rx5670 server are connected to the integrated SCSI as follows (see Figure 6-6 and Figure 6-7): • The MP/SCSI board in PCI slot 1 has a SCSI connector cabled to physical drives A and B • The LAN/SCSI board in PCI slot 3 has a SCSI connector cabled to physical drives C and D Figure 6-6 Default Cabling for Internal SCSI Hot Plug Drives Figure 6-7 Physical Drive Location (front of server with bezel removed) CD AB To use RAID with your hot plug drives, you need to disconnect the internal SCSI cables from their embedded controller and reconnect them to the HP Smart Array 5302 or 5304 controller card using the supplied A9828-63001 and A9828-63002 cables, as described below. 62 Chapter 6