HP Integrity Superdome SX1000 Internal Cabling Guide for HP Smart Array Contro - Page 72

Removing the PCI Cage Board Cover, PCI Card Order, Step 4.

Page 72 highlights

Cabling for the HP 9000 rp3440 Server Installing the HP Smart Array Controller Card Step 4. Grasp the PCI cage cover and slide it away from the bulkhead end of the PCI cage. Lift the cover off the PCI cage as shown in Figure 7-3. Figure 7-3 Removing the PCI Cage Board Cover Step 5. Install the HP Smart Array controller card in PCI Slot 3 (see Figure 7-4). This is required when connecting the HP Smart Array controller card to the internal hard disk drives. Figure 7-4 PCI Card Order 12 3 4 NOTE Do not slide the PCI cage cover back onto the system at this point. You do this later. 68 Chapter 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96

Cabling for the HP 9000 rp3440 Server
Installing the HP Smart Array Controller Card
Chapter 7
68
Step 4.
Grasp the PCI cage cover and slide it away from the bulkhead end of the PCI cage. Lift the cover off
the PCI cage as shown in Figure 7-3.
Figure 7-3 Removing the PCI Cage Board Cover
Step 5.
Install the HP Smart Array controller card in PCI Slot 3 (see Figure 7-4). This is required when
connecting the HP Smart Array controller card to the internal hard disk drives.
Figure 7-4 PCI Card Order
NOTE
Do not slide the PCI cage cover back onto the system at this point. You do this later.
1
2
3
4