HP Integrity Superdome SX1000 Internal Cabling Guide for HP Smart Array Contro - Page 71
Installing the HP Smart Array Controller Card, Removing the PCI Cage
View all HP Integrity Superdome SX1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Cabling for the HP 9000 rp3440 Server Installing the HP Smart Array Controller Card required for RAID, you need to install cable A7231-63025. Refer to "Recabling for RAID" on page 69. If you opt to use both ports of the Smart Array controller card for your internal drives, you must purchase an additional HP Smart Array controller if you want external RAID mass storage. Installing the HP Smart Array Controller Card Step 1. If the server is running, shut down the OS, power off the server, and unplug the power cord. Step 2. Remove the metal system cover as described in the server's operation and maintenance guide. Step 3. Lift the PCI cage release lever along with the back edge of the PCI cage in order to lift the PCI cage out of the system (see Figure 7-2). Figure 7-2 Removing the PCI Cage Chapter 7 67