HP Integrity Superdome SX1000 Internal Cabling Guide for HP Smart Array Contro - Page 77

Dual Channel RAID Cabling from a Controller Card Installed in

Get HP Integrity Superdome SX1000 PDF manuals and user guides View all HP Integrity Superdome SX1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 77 highlights

Cabling for the HP 9000 rp3440 Server Recabling for RAID other part of the cables which are labeled Channel A (bottom) and Channel B (top) should exit the PCI cage flush against where the PCI board cover and cable channel fit on the PCI cage (see Figure 7-16). NOTE Do not reinstall the PCI cage or plug the other end of the cable into the hard drive backplane yet. You do this later. Figure 7-14 Single Channel RAID Cabling from a Controller Card Installed in the PCI Cage Figure 7-15 Dual Channel RAID Cabling from a Controller Card Installed in the PCI Cage Step 13. Replace the PCI cage board cover, routing the RAID cable out of the cover's cable channel (see Figure 7-16). Note that the cable should be folded down flush against the controller card, with the latter half of the cable bent in order to exit through the cover's cable channel (see Item 1 in Figure 7-16). Figure 7-16 RAID Cable Routing Through the PCI Cage Board Cover Chapter 7 1 73

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
Cabling for the HP 9000 rp3440 Server
Recabling for RAID
Chapter 7
73
other part of the cables which are labeled Channel A (bottom) and Channel B (top) should exit
the PCI cage flush against where the PCI board cover and cable channel fit on the PCI cage (see
Figure 7-16).
NOTE
Do not reinstall the PCI cage or plug the other end of the cable into the hard drive
backplane yet. You do this later.
Figure 7-14 Single Channel RAID Cabling from a Controller Card Installed in
the PCI Cage
Figure 7-15 Dual Channel RAID Cabling from a Controller Card Installed in the
PCI Cage
Step 13.
Replace the PCI cage board cover, routing the RAID cable out of the cover's cable channel (see
Figure 7-16). Note that the cable should be folded down flush against the controller card, with the
latter half of the cable bent in order to exit through the cover’s cable channel (see Item 1 in
Figure 7-16).
Figure 7-16 RAID Cable Routing Through the PCI Cage Board Cover
1