HP KG461AA HP QuickDock 2.0 Docking Station - User Guide - Page 14
Connecting to a network
UPC - 883585653348
View all HP KG461AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Connecting to a network NOTE: To communicate using the modem on your computer and an analog telephone line, connect one end of a modem cable to the RJ-11 (modem) jack on your computer and the other end to an RJ-11 telephone jack. Refer to your computer user guide for more information. You can connect your computer through the QuickDock to a network. This requires an Ethernet cable (purchased separately). NOTE: The RJ-45 (network) jack on the computer is disabled when the computer is connected to the QuickDock. 1. Connect the QuickDock to your computer. 2. Connect one end of the Ethernet cable to the RJ-45 (network) jack on the QuickDock (1) and the other end to a RJ-45 wall jack (2) or router. 10 Chapter 2 Using the QuickDock
Connecting to a network
NOTE:
To communicate using the modem on your computer and an analog telephone line, connect
one end of a modem cable to the RJ-11 (modem) jack on your computer and the other end to an RJ-11
telephone jack. Refer to your computer user guide for more information.
You can connect your computer through the QuickDock to a network. This requires an Ethernet cable
(purchased separately).
NOTE:
The RJ-45 (network) jack on the computer is disabled when the computer is connected to the
QuickDock.
1.
Connect the QuickDock to your computer.
2.
Connect one end of the Ethernet cable to the RJ-45 (network) jack on the QuickDock
(1)
and the
other end to a RJ-45 wall jack
(2)
or router.
10
Chapter 2
Using the QuickDock