HP LaserJet Enterprise M604 User Guide 1 - Page 127

Clear staple jams in the stapler/stacker, The stapler needs to reload after clearing a staple jam

Page 127 highlights

2. Carefully remove any jammed paper. 3. Close the door on the stacker or stapler/stacker, and close the rear output bin. NOTE: The output bin must be pushed down into the lowest position for printing to continue. Clear staple jams in the stapler/stacker Use the following procedure to clear staple jams in the stapler/stacker. When a jam occurs, the control panel displays an animation that assists in clearing the jam. The stapler needs to reload after clearing a staple jam, so the first few documents might not be stapled. If a print job is sent and the stapler is jammed or is out of staples, the job will still print as long as the path to the stacker bin is not blocked. ENWW Clear paper jams 117

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140

2.
Carefully remove any jammed paper.
3.
Close the door on the stacker or stapler/stacker,
and close the rear output bin.
NOTE:
The output bin must be pushed down into
the lowest position for printing to continue.
Clear staple jams in the stapler/stacker
Use the following procedure to clear staple jams in the stapler/stacker. When a jam occurs, the control panel
displays an animation that assists in clearing the jam.
The stapler needs to reload after clearing a staple jam, so the first few documents might not be stapled. If a print
job is sent and the stapler is jammed or is out of staples, the job will still print as long as the path to the stacker
bin is not blocked.
ENWW
Clear paper jams
117